MFactory / YCW Aeris Series Coilovers Ford 13+ Focus ST

$ 1,569.95

PLEASE NOTE ON YOUR ORDER WHICH SPRING RATES YOU WOULD PREFER. IF YOU DO NOT KNOW WHICH SPRING RATES YOU NEED, FEEL FREE TO EMAIL US AT SALES@JST-PERFORMANCE.COM FOR A CONSULTATION.

After countless hours of research into the various coilover setups currently available on the market, we noticed that there is a gap in the market for a budget setup that is: 

1) Designed and Engineered in the United Kingdom by British Engineers 
2) Offers a large choice of Linear Spring Rates, from 4K-34K 
3) Utilises premium quality service components (i.e Valving, Oil Seals, Damper Fluid and Springs) 
4) Offers local (North American, European and Asian) facilities for rebuild and servicing 
5) Fully upgradeable to our more competition-orientated 2-Way and 3-Way Coilover Kits
 

The target market segment for our Aeris Series Coilovers are the everyday street car that may occasionally see some track time. We basically took our Reference Series coilovers and removed components that were deemed unnecessary for the everyday street car, hence making them more budget-friendly. At only marginally more cost than the multitude of Taiwanese budget coilovers currently available on the market, you get a higher quality, better performing, British-Engineered coilover solution with an industry-leading warranty, unparalleled after-sales technical support and multi-national product servicing. Due to the nature of a customized product, we currently have a 1-2 week assembly lead time. None of the coilover kits we supply are off-the-shelf.

Features:

Forged 6061-T6 Hard Anodised Aluminium Front Upper Mounts

-Strong and Lightweight, our Forged Upper Mounts are Hard Anodised for superior Corrosion Resistance

Forged 6061-T6 Hard Anodised Aluminium Rear Upper Mounts (Where Applicable)

-Strong and Lightweight, our Forged Upper Mounts are Hard Anodised for superior Corrosion Resistance

High-Tensile Carbon Steel Front Camber Plate with Anti-Slip Coating

-CNC-Machined High-Tensile Carbon Steel supports more load than lesser-quality mounts

-Camber Angles can be adjusted precisely to your driving needs (MacPherson)

Forged 6061-T6 Hard Anodised Aluminium Upper Spring Perch

-Strong and Lightweight, our Forged Upper Spring Perches are Hard Anodised for superior Corrosion Resistance

65mm ID Cold-Wound Japanese HS5.TW Steel Linear Springs from SWIFT

-Although more expensive, we believe the increase in performance more than offsets the marginal increase in manufacturing costs

OEM-Balanced Spring Rates

-The majority of budget coilovers currently on the market offer default spring rates that deviate from the oem-balanced spring rates. By not accounting for Motion Ratio Calculations and just replicating race-car setups, this results in a very unbalanced and uncomfortable ride on a Street Car

-All Aeris Series Coilovers are supplied with oem-balanced spring rates, offering you increased performance without sacrificing ride comfort

52mm OD Cold-Drawn Japanese SAE 1020 Seamless Carbon Steel Shock Body

-Offers superior physical properties and strength-to-weight ratio over lesser manufacturing processes

Black-Zinc Plated Fully-Threaded Shock Body with 250hrs of Salt-Spray Testing, Offers superior corrosion-resistance

Forged SAE 4140 Chromoly Steel Piston Rod

-Monotube shocks, although offering increased performance over Twintube shocks, have an inherent weakness; a load-bearing Piston Rod
 - Offering a substantial increase in tensile strength over lesser-quality rods, not only does this keep costs down, it significantly increases product safety

32-Level Rebound Adjustment

-Our Aeris Series Coilovers allow 32 levels of Rebound Adjustments, allowing you to fine-tune your vehicle comfort and handling
-Proprietary Bleed Needles and Jet Valves from the USA are used which significantly increases fluid control sensitivity between adjustments

BS 420S29 Steel Shims

-Offers superior surface finish and dimensional tolerances, increasing fluid control sensitivity and smoothness

Silkolene PRO RSF 5.0 Damper Oil

-A proprietary formula providing consistent damping over a wide temperature range and superior anti-stiction/anti-friction properties. This British lubricant is the best performing damper fluid on the market today, as used standard by both Penske and Ohlins

Viton Performance O-Rings

-Upgraded O-Rings offering better performance and durability than lesser-quality Rubber O-Rings

Nitrogen Pressure Schrader Valve

-Allows convenient loss-free fine-tuning of Nitrogen Pressure
 

Forged 6061-T6 Hard Anodised Aluminium Lower Spring Perch Locking Collar

-Strong and Lightweight, our Forged Locking Collars are hard anodised for superior Corrosion Resistance

-1pc Locking Collars, providing secure and hassle-free adjustments

Fully-Threaded Forged 6061-T6 Hard Anodised or High-Tensile Carbon Steel Lower Mount

-Threaded Lower Mounts allows us to use a longer shock body for increased performance

-Shock Stroke is unaffected by Ride Height changes

-Allows an increased Height Adjustment range

Fully Rebuildable

-Our Aeris Series Coilovers are fully rebuildable, with spare parts always in stock and available for purchase directly from one of our local service facilities

You recently viewed

Clear recently viewed