JBR Focus ST Valve Cover Oil Catch Can Kit
$ 185.00
During everyday engine operation, blow-by gases, as well as oil vapor generated from the engines rotating assembly, are vented from the engines valve cover and routed into the intake for the engine to burn off. This oil vapor then travels through the turbo and into the intercooler lining the walls with oil. Before ever making it into the cylinders, some of that oil mist and other contaminates adhere to the backside of the hot intake valves. Over time a thick crust forms, significantly reducing performance and potentially leading to a costly cleaning or repair. This is especially a problem for the 2.0L motor because there's no fuel (Direct Injection) passing over the valves to wash and keep them clean. This is why an valve cover oil catch can is so important.
As the PCV gases enter the catch can a pressure drop occurs. The oil then begins to fall out of suspension as it flows through a series of 3 perforated filter plates. As the gases flow through the plates, the oil sticks and the gas is all that reaches the outlet at the top of the catch can. Oil that accumulates on the filter plates runs off and is collected in the bottom where a large 5/8" quick drain makes emptying the catch can a breeze.
Throughout the life of the catch can, the perforated filter plates will never break down or need to be replaced like catch cans with screens and mesh filter material.
*Requires a Sound Symposer Block-Off Kit
Application:- 2013 & up Ford Focus ST
Features:- Designed and Manufactured in the USA
- Easily installed utilizing the supplied OEM factory fittings
- Hoses cut to length and pre-assembled
- Entirely constructed out of 6061 aluminum
- Precision TIG welding of all components
- Large 5/8" easily operated drain valve
Includes:- 1 Oil catch can
- Application specific mounting brackets
- Pre-assembled polyester reinforced oil, fuel and chemical resistant hose with factory fittings
- Stainless hose clamps
- Stainless mounting hardware
- Drain Hose
- Quick drain valve
- Check valve (Optional)
- Installation instructions are available in our support section
As the PCV gases enter the catch can a pressure drop occurs. The oil then begins to fall out of suspension as it flows through a series of 3 perforated filter plates. As the gases flow through the plates, the oil sticks and the gas is all that reaches the outlet at the top of the catch can. Oil that accumulates on the filter plates runs off and is collected in the bottom where a large 5/8" quick drain makes emptying the catch can a breeze.
Throughout the life of the catch can, the perforated filter plates will never break down or need to be replaced like catch cans with screens and mesh filter material.
*Requires a Sound Symposer Block-Off Kit
Application:- 2013 & up Ford Focus ST
Features:- Designed and Manufactured in the USA
- Easily installed utilizing the supplied OEM factory fittings
- Hoses cut to length and pre-assembled
- Entirely constructed out of 6061 aluminum
- Precision TIG welding of all components
- Large 5/8" easily operated drain valve
Includes:- 1 Oil catch can
- Application specific mounting brackets
- Pre-assembled polyester reinforced oil, fuel and chemical resistant hose with factory fittings
- Stainless hose clamps
- Stainless mounting hardware
- Drain Hose
- Quick drain valve
- Check valve (Optional)
- Installation instructions are available in our support section
