JBR Focus RS PCV Oil Catch Can Kit
As the PCV gases enter the catch can a pressure drop occurs. The oil then begins to fall out of suspension as it flows through a series of 3 perforated filter plates. As the gases flow through the plates, the oil sticks and the gas is all that reaches the outlet at the top of the catch can. Oil that accumulates on the filter plates runs off and is collected in the bottom where a large 5/8" quick drain makes emptying the catch can a breeze.
Throughout the life of the catch can, the perforated filter plates will never break down or need to be replaced like catch cans with screens and mesh filter material.
What's wrong with the OEM PCV valve?The short answer is nothing as long as you never reach maximum boost of the factory tune. The OEM PCV valve in the Focus RS is unable to seal completely and leaks under maximum boost.
Because the PCV valve is the heart of the PCV system, let's take a minute to discuss it. This thing is notorious for not being able to completely close to prevent boost from entering the crankcase, even when brand new. Add a few thousand miles worth of crud flowing back and forth through and the worse it gets. And the more boost you run, the greater the problem becomes.
The optional check valve kit is designed to be closed 100% of the time unless vacuum is present. This check valve is oil, fuel and chemical resistant. It's constructed from brass, it has an incredibly low crack pressure and it's properly sized so that normal flow isn't affected.
Unfortunately, the OEM check valve just can't close instantly under boost and therefore crankcase pressure and turbo spool times are increased. For higher boosting cars or those seeking the best possible performance out of their engine, an OCC check valve is recommended.
Application:- 2016 & up Ford Focus RS
Features:- Designed and Manufactured in the USA
- Easily installed utilizing the supplied OEM factory fittings
- Hoses cut to length and pre-assembled
- Entirely constructed out of 6061 aluminum
- Precision TIG welding of all components
- Large 5/8" easily operated drain valve
Includes:- 1 Oil catch can
- Application specific mounting brackets
- Pre-assembled polyester reinforced oil, fuel and chemical resistant hose with factory fittings
- Stainless hose clamps
- Stainless mounting hardware
- Drain Hose
- Quick drain valve
- Check valve (Optional)